BU4344G-TR Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Tape & Reel (TR)-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please refer to power management for SC-74A, SOT-753 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. IC management conducts at a voltage of 2.4V. Power ics operate at 1 supply voltages. By Surface Mount, IC management has been mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. A total of 5 pins are located on this power management. This power management system has 5 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 700mV, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 7V volts. The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~125°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. A similar IC managements number of the manufacturer can always be found by using BU43*, the base power ics number. A maximum supply temperature of 1.75μA can be used.
BU4344G-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
BU4344G-TR Applications
There are a lot of ROHM Semiconductor BU4344G-TR Voltage Supervisors applications.
- Military electronics
- Data storage applications
- Analog circuit
- Detection of phase sequence
- Automotive permanent magnet synchronous motors
- Detection of phase loss
- Power distribution systems of CCU
- Telecommunications equipment
- Set top box
- Solar power charger
