BU4342FVE-TR Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. It is packaged with Tape & Reel (TR). Power management is possible to find a series of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. In this PMIC, you can find SOT-665 functions for your reference. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. When a supply voltage of 2.4V is applied to the power ic, it conducts. During operation, the power ic is supplied with a voltage of 1. The power management is mounted by a Surface Mount-axis. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. A total of 5 pins are located on this power management. There are 5 pins on the power managment ic. Supply voltage (Vsup) should be at least 700mV for this power management. The supply voltage (Vsup) should not exceed 7V volts in this IC power. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. If you want to search for similar IC managements of this manufacturer, you can always refer to BU43*, which is the base power ics number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1.75μA.
BU4342FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
BU4342FVE-TR Applications
There are a lot of ROHM Semiconductor BU4342FVE-TR Voltage Supervisors applications.
- Sensitive sensors
- Microprocessor system
- Leakage current detection
- Network equipment
- Dash board
- Embedded computing
- FPGA design
- Kitchen appliances
- Display equipment
- Multi-voltage system
