BU4336FVE-TR Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. Power management is packaged in a Tape & Reel (TR) way. As a reference, this IC management includes 1 functions for your convenience. This power management is made up of 1 channels which are available in a series format. In this IC management you will find SOT-665 functions for you to refer to. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. When a supply voltage of 2.4V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. By Surface Mount, IC management has been mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 5 pins that are attached to IC management. There are 5 pins on the power managment ic. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 700mV, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 7V volts. In this case, Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~125°C TA. Power management has an output of Push-Pull, Totem Pole during operation. It is always advisable to use BU43*, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature is 1.75μA.
BU4336FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
BU4336FVE-TR Applications
There are a lot of ROHM Semiconductor BU4336FVE-TR Voltage Supervisors applications.
- Household appliances
- Digitally controlled LDO regulators circuit
- Rechargeable batteries
- Telecommunications equipment
- Kitchen appliances
- Battery cars
- Detection of phase imbalance
- Linux and server computing
- Radio
- Power distribution systems of CCU
