BU4335FVE-TR Overview
There are 5 terminals connected to this power management, which makes it easy to mount. There is a Tape & Reel (TR)-packaging method applied to IC management. Please find attached 1 functions for your reference in this IC power. There are 1 channels on this power managment ic that can be found in a series. In this PMIC, you can find SOT-665 functions for your reference. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. When a supply voltage of 2.4V is applied to the power ic, it conducts. Power ics operate at 1 supply voltages. The power management is mounted by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. Power management has a total of 5 pins. There are 5 pins on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 700mV, which is the minimum supply voltage that should be applied. During this IC power, the maximum supply voltage (Vsup) should not exceed 7V volts. Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~125°C TA. Power management has an output of Push-Pull, Totem Pole during operation. It is always advisable to use BU43*, the base supervisor number, when searching for similar PMICs from the manufacturer. At most, voltage supervisor can operate at a supply temperature of 1.75μA.
BU4335FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
BU4335FVE-TR Applications
There are a lot of ROHM Semiconductor BU4335FVE-TR Voltage Supervisors applications.
- Household appliances
- Utility meter
- Military communications
- Urban rail transit weak current power monitoring
- Electronics installed in the vehicle
- Transformer load monitoring equipment
- Computer applications
- Multi-voltage system
- Fire equipment power monitoring system
- Display equipment
