BU4333FVE-TR Overview
Power management is mounted through 5 terminals. It is packaged with Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. There are SOT-665 functions included in this PMIC so that you can refer to them. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. When a supply voltage of 2.4V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. Surface Mount is the one that mounts power management. This power ic can be sub-categorized as Power Management Circuits. It has a total of 5 pins that are attached to IC management. The pins of the power management system count 5. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 700mV. This IC power should be powered by no more than 7V volts of supply voltage (Vsup). The recommended mounting type is Surface Mount. Temperature setting for the supervisors should be -40°C~125°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. It is always advisable to use BU43*, the base supervisor number, when searching for similar PMICs from the manufacturer. At the most, voltage supervisor can work with a supply temperature of 1.75μA.
BU4333FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
BU4333FVE-TR Applications
There are a lot of ROHM Semiconductor BU4333FVE-TR Voltage Supervisors applications.
- Rechargeable batteries
- Sensitive sensors
- Analog circuit
- Radio
- Data storage applications
- Unattended substation automation
- Dash board
- Digitally controlled LDO regulators circuit
- DVR
- Set top box
