BU4324FVE-TR Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. In terms of packaging, power management follows the Tape & Reel (TR) model. In this IC power you will find 1 functions for you to refer to. This power management is made up of 1 channels which are available in a series format. IC management is packaged as a SOT-665 package. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. A supply voltage of 2.4V is used to conduct the PMIC chip. During operation, the power ic is supplied with a voltage of 1. The power management is mounted by Surface Mount. The power management belongs to the Power Management Circuits subcategory. 5 pins are present in total in this power management. Pin count of the power management is 5. There should be a minimum voltage supply (Vsup) of 700mV for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 7V volts. In this case, Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. It is always advisable to use BU43*, the base supervisor number, when searching for similar PMICs from the manufacturer. At the most, voltage supervisor can work with a supply temperature of 1.75μA.
BU4324FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
BU4324FVE-TR Applications
There are a lot of ROHM Semiconductor BU4324FVE-TR Voltage Supervisors applications.
- DC stabilized power supply module
- Automotive permanent magnet synchronous motors
- Kitchen appliances
- Analog circuit
- Radar
- FPGA design
- Low voltage/high power - AI, GPU
- Battery cars
- DSP
- Automotive power systems
