BU4247G-TR Overview
There are 5 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. Power management is possible to find a series of 1 functions. There are 1 channels on this power managment ic that can be found in a series. As a reference, this IC power includes SC-74A, SOT-753 functions for your convenience. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. When a supply voltage of 2.4V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. The mount is attached to Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 5. 5 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 700mV. During this IC power, the maximum supply voltage (Vsup) should not exceed 7V volts. The recommended mounting type for IC management is Surface Mount. The supervisors should be set to the following temperature: -40°C~125°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. You can always use BU42*, the base supervisor number, to search for similar PMICs of the manufacturer. Voltage supervisor can work with a supply temperature of 1.75μA at the most.
BU4247G-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
BU4247G-TR Applications
There are a lot of ROHM Semiconductor BU4247G-TR Voltage Supervisors applications.
- Electric heating appliances
- Medical-specific insulation monitor
- Leakage current detection
- Cloud computing
- Kitchen appliances
- Magnetic resonance imaging
- Detection of phase sequence
- Household appliances
- External alarm
- Dash board
