BU4247F-TR Overview
A total of 4 terminals are used to mount this power management. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please refer to this PMIC for 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. As a reference, this IC power includes SC-82 functions for your convenience. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. During operation, the power ic is supplied with a voltage of 2.4V. When a supply voltage of 1 is applied to the power ic, it conducts. The power management is mounted by a Surface Mount-axis. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, the power management has 4 pins in it. There are 82 pins on the supervisor. There should be a minimum voltage supply (Vsup) of 700mV for this PMIC. Voltage (Vsup) shouldn't exceed 7V volts in this PMIC. The recommended mounting type is Surface Mount. This range of temperature should be set for the supervisors: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. A similar IC managements number of the manufacturer can always be found by using BU42*, the base power ics number. Voltage supervisor can work with a supply temperature of 1.75μA at the most.
BU4247F-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
BU4247F-TR Applications
There are a lot of ROHM Semiconductor BU4247F-TR Voltage Supervisors applications.
- Dash board
- Computer applications
- Military electronics
- Electrical fire monitoring system
- Radio
- Stable power system
- Detection of phase imbalance
- Power distribution systems of infant care room
- Smartphones
- FPGA design
