BU4246G-TR Overview
There are 5 terminals connected to this power management, which makes it easy to mount. Packaging is in the form of a Tape & Reel (TR). Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 1 channels that can be found. Please refer to power management for SC-74A, SOT-753 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. The supervisor is always powered by a 2.4V volt supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is provided by Surface Mount. This power ic can be sub-categorized as Power Management Circuits. It has a total of 5 pins that are attached to IC management. 5 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 700mV. The supply voltage (Vsup) should not exceed 7V volts in this IC power. Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~125°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. The supply current of the power management is 550nA. A similar IC managements number of the manufacturer can always be found by using BU42*, the base power ics number. The maximum supply temperature voltage supervisor can handle is 1.75μA.
BU4246G-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
550nA operating supply current
BU4246G-TR Applications
There are a lot of ROHM Semiconductor BU4246G-TR Voltage Supervisors applications.
- Leakage protection
- Detection of phase imbalance
- Transformer load monitoring equipment
- Household appliances
- Electric heating appliances
- Military electronics
- Leakage current detection
- Stable power system
- Satellite navigation
- Multi-voltage system
