BU4244F-TR Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 4 in total. Power management is packaged in a Tape & Reel (TR) way. Please refer to this PMIC for 1 functions. A series of 1 channels can be found on this supervisor. In this IC management you will find SC-82 functions for you to refer to. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. When a supply voltage of 2.4V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. Surface Mount is the one that mounts power management. This power ic can be sub-categorized as Power Management Circuits. In total, IC powers are 4 pins on the board. 4 pins are present on the power management system. A voltage (Vsup) that doesn't fall below 700mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The supply voltage (Vsup) should not exceed 7V volts in this IC power. Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~125°C TA . The output voltage of this power managment ic during operation is Open Drain or Open Collector. It is always advisable to use BU42*, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature is 1.75μA.
BU4244F-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
BU4244F-TR Applications
There are a lot of ROHM Semiconductor BU4244F-TR Voltage Supervisors applications.
- Important electronics for automotive safety
- Embedded computing
- Radar
- Stable power system
- Cloud computing
- Dash board
- Detection of phase imbalance
- Analog circuit
- Military electronics
- Computer applications
