BU4241G-TR Overview
As you can see, this power management is mounted through 5 terminals. It is packaged with Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. This power managment ic consists of 1 channels, each of which can be used independently. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. There is a voltage supply of 2.4V for the PMIC chip, and the chip conducts at that voltage. When 1 is applied to the power ic, it conducts. The power management is mounted by a Surface Mount-axis. There is a subcategory of this power ic known as Power Management Circuits. 5 pins are present in total in this power management. Pin count of the power management is 5. Supply voltage (Vsup) should be at least 700mV for this power management. There should be no more than 7V volts of supply voltage (Vsup) in this power management. The recommended mounting type is Surface Mount. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. During operation, this power management system outputs Open Drain or Open Collector. It is always advisable to use BU42*, the base supervisor number, when searching for similar PMICs from the manufacturer. At most, voltage supervisor can operate at a supply temperature of 1.75μA.
BU4241G-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
BU4241G-TR Applications
There are a lot of ROHM Semiconductor BU4241G-TR Voltage Supervisors applications.
- Precision measurement
- Military electronics
- Electric heating appliances
- Radio
- External alarm
- Insulation fault location system
- Magnetic resonance imaging
- Transformer load monitoring equipment
- Power distribution systems of CCU
- Leakage protection
