BU4233FVE-TR Overview
This power management consists of 5 mounting terminals on which it can be mounted. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please find attached 1 functions for your reference in this IC power. On this supervisor, there is a series of 1 channels that can be found. Please find attached SOT-665 functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. When 2.4V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. By Surface Mount, IC management has been mounted. There is a subcategory of this power ic known as Power Management Circuits. In total, IC powers are 5 pins on the board. 5 pins are present on the power management system. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 700mV. The maximum supply voltage (Vsup) in this PMIC should not exceed 7V volts. Mounting type Surface Mount is recommended. Temperature setting for the supervisors should be -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. It is always advisable to use BU42*, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature voltage supervisor can handle is 1.75μA.
BU4233FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
BU4233FVE-TR Applications
There are a lot of ROHM Semiconductor BU4233FVE-TR Voltage Supervisors applications.
- Important electronics for automotive safety
- External alarm
- Urban rail transit weak current power monitoring
- Display equipment
- Detection of phase loss
- Medical-specific insulation monitor
- Analog circuit
- DSP
- Precision measurement
- Important electronics for automotive protection
