BU4225F-TR Overview
A total of 4 terminals are used to mount this power management. Packaging is in the form of a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. This power managment ic consists of 1 channels, each of which can be used independently. There are SC-82 functions included in this PMIC so that you can refer to them. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. When a supply voltage of 2.4V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. Power management is included in the Surface Mount mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Power management has a total of 4 pins. There are 82 pins on the supervisor. IC management can only work with a supply voltage of 700mV volts. The supply voltage (Vsup) should not exceed 7V volts in this IC power. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. A similar IC managements number of the manufacturer can always be found by using BU42*, the base power ics number. A maximum supply temperature of 1.75μA can be used with this power management.
BU4225F-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
BU4225F-TR Applications
There are a lot of ROHM Semiconductor BU4225F-TR Voltage Supervisors applications.
- Precision measurement
- FPGA design
- Detection of phase imbalance
- Radar
- Smart meter
- Unattended substation automation
- Consumer electronics
- Military communications
- Magnetic resonance imaging
- Medical-specific insulation monitor
