BU4222FVE-TR Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Packaged in the form of a Tape & Reel (TR), power management is easy to use. In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. To assist you, this PMIC includes SOT-665 functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. During operation, the power ic is supplied with a voltage of 2.4V. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount mounts IC management. Power Management Circuits is a subcategory of this PMIC chip. Power management has a total of 5 pins. There are 5 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 700mV. The supply voltage (Vsup) should not exceed 7V volts in this IC power. The recommended mounting type for IC management is Surface Mount. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. A similar IC managements number of the manufacturer can always be found by using BU42*, the base power ics number. The power management can work with a maximum supply temperature of 1.75μA.
BU4222FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
BU4222FVE-TR Applications
There are a lot of ROHM Semiconductor BU4222FVE-TR Voltage Supervisors applications.
- Set top box
- Detection of phase imbalance
- Power distribution systems of CCU
- Multi-voltage system
- DSP
- Important electronics for automotive safety
- Electronics installed in the vehicle
- DVR
- Battery-powered equipment
- FPGA design
