BU4222F-TR Overview
There are 4 mounting terminals on the voltage supervisor, each of which has a different function. There is a Tape & Reel (TR)-packaging method applied to IC management. In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. As a reference, this IC power includes SC-82 functions for your convenience. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. The supervisor is always powered by a 2.4V volt supply. When a supply voltage of 1 is applied to the power ic, it conducts. By Surface Mount, IC management has been mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, the power management has 4 pins in it. Pin count of the power management is 4. A voltage (Vsup) that doesn't fall below 700mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) in this PMIC should not exceed 7V volts. Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~125°C TA . Power management has an output of Open Drain or Open Collector during operation. A similar IC managements number of the manufacturer can always be found by using BU42*, the base power ics number. The maximum supply temperature voltage supervisor can handle is 1.75μA.
BU4222F-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
BU4222F-TR Applications
There are a lot of ROHM Semiconductor BU4222F-TR Voltage Supervisors applications.
- Power distribution systems of CCU
- Detection of phase imbalance
- Dash board
- Solar power charger
- Magnetic resonance imaging
- Important electronics for automotive protection
- Battery cars
- Electric heating appliances
- Important electronics for automotive safety
- Sensitive sensors
