BU4218FVE-TR Overview
This power management consists of 5 mounting terminals on which it can be mounted. Tape & Reel (TR)-packaging is used. Power management is possible to find a series of 1 functions. A series of 1 channels can be found on this supervisor. In this IC management you will find SOT-665 functions for you to refer to. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. A supply voltage of 2.4V is used to conduct the PMIC chip. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is attached to Surface Mount. The power management belongs to the Power Management Circuits subcategory. There are a total of 5 pins on power management. Power managment ic pin count is 5. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 700mV, which is the minimum supply voltage that should be applied. In this PMIC, the maximum supply voltage (Vsup) should not exceed 7V volts. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~125°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. You can always use BU42*, the base supervisor number, to search for similar PMICs of the manufacturer. The power management can work with a maximum supply temperature of 1.75μA.
BU4218FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
BU4218FVE-TR Applications
There are a lot of ROHM Semiconductor BU4218FVE-TR Voltage Supervisors applications.
- Stable power system
- External alarm
- WiFi router
- Solar power charger
- Radio
- emergency room
- Power distribution systems of ICU
- Important electronics for automotive protection
- Power distribution systems of infant care room
- Computer applications
