BU4214FVE-TR Overview
Power management is mounted through 5 terminals. It is packaged with Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please refer to power management for SOT-665 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. In a 2.4V supply voltage, the power management conducts. Power management conducts at a voltage of 1. The mount is attached to Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. The total number of pins on this power management is 5. 5 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 700mV. This IC power should be powered by no more than 7V volts of supply voltage (Vsup). The recommended mounting type for IC management is Surface Mount. This range of temperature should be set for the supervisors: -40°C~125°C TA. During operation, this power management system outputs Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 550nA is the recommended value. For similar manage ics search of the manufacturer, you can always refer to BU42*, the base PMIC number. A maximum supply temperature of 1.75μA can be used.
BU4214FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
550nA operating supply current
BU4214FVE-TR Applications
There are a lot of ROHM Semiconductor BU4214FVE-TR Voltage Supervisors applications.
- Magnetic resonance imaging
- Personal computers
- Display equipment
- Battery cars
- Radar
- Insulation fault location system
- Microprocessor system
- Functional modules
- Power distribution systems of ICU
- Electronics installed in the vehicle
