Name: BU4066BC
Brand: ROHM Semiconductor
SKU: BU4066BC
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	10 Weeks
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	14-DIP (0.300, 7.62mm)
Number of Pins	14
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2005
JESD-609 Code	e2
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
Resistance	280Ohm
Terminal Finish	TIN COPPER
Subcategory	Multiplexer or Switches
Max Power Dissipation	1.18W
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
[email protected] Reflow Temperature-Max (s)	10
Base Part Number	BU4066
Output	SEPARATE OUTPUT
Pin Count	14
Polarity	Non-Inverting
Power Supplies	5/15V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	18V
Min Supply Voltage	3V
Operating Supply Current	4μA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	140 ns
Supply Type	Single
Turn-Off Delay Time	140 ns
Max Dual Supply Voltage	9V
On-State Resistance (Max)	280Ohm
Min Dual Supply Voltage	1.5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	300nA
Channel Capacitance (CS(off), CD(off))	10pF
On-state Resistance Match-Nom	25Ohm
Switch Circuit	SPST - NO
Crosstalk	-50dB @ 1MHz
Voltage - Supply, Single (V+)	3V~18V
Normal Position	NO
Width	7.62mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

BU4066BC Product Details

BU4066BC Overview

Due to its 14-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. The advanced packaging method Tube provides high reliability. In Through Hole, this analog switch is mounted. There is 1:1 ratio between the number of multiplexers and demultiplexers. Temperatures around -40°C~85°C TA are extended for operation. There are 14 terminations totally. High-quality output is provided by the electronic component's 1 channels. It is safe to turn on and run the electronic component with a 5V voltage supply. There is an electrical component included in the 14 series. The analog switch ics are built using SPST - NO switching circuits. There are 4 circuits in this switch device. Try searching for the analog switch ic with BU4066 if you are looking for variants. An switch multiplexer with 280Ohm internal resistance has a value of 280Ohm. You can find the functions of the 14 pins in the datasheets. This switch device is a typical Multiplexer or Switches. Multiplexers should not be powered above 18V in normal situations. An effective Single supply digital multiplexer. A low voltage of 3V should be applied to the electronic component. It would be sufficient to run this analogue multiplexer with 4μA current. This analogue multiplexer requires a voltage of 3V~18V when it drains from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than 1μA. Despite this switch device's dual supply capability, its voltage should not exceed 9V. With dual power supplies, you should attach at least 1.5V. The outputs of this digital multiplexer are SEPARATE OUTPUT in number.