BU4053BCF-E2 Overview
Shipping overseas is convenient due to the electrical component's packing in SOP. High reliability is provided by advanced packaging method Tape & Reel (TR). 16 terminations have been made so far. A electrical component with 3 channels is capable of high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. The internal resistance of this digital multiplexer is 160Ohm. For details about the functions of 16 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. Users shouldn't supply more than 18V voltage to the switch device. Analogue multiplexers of the Single supply type that are cost-effective. A low voltage of 3V should be applied to the electronic component. An operating current of 15μA would be sufficient for this switch device. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 9V. A dual power supply should have at least 1.5V voltage attached. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board. Among the inputs that can be operated are the 6 inputs. In 20MHz-bandwidths, data can be transferred. A temperature above 85°C is not suitable for operation of the analogue multiplexer.
BU4053BCF-E2 Features
3 Channels
15μA Supply Current
Bandwidth: 20MHz
BU4053BCF-E2 Applications
There are a lot of ROHM Semiconductor BU4053BCF-E2 Analog Switches & Multiplexers ICs applications.
- Mechanical reed relay replacement
- SONET/SDH ADM
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Public switching systems
- Video signal routing
- Cell phones
- Communication systems
- PBXs
- Sample-and-hold systems
- Frame Relay Equipment
