BU21051FS-E2 Overview
The product is packaged with the materials of Tape & Reel (TR).16-LSOP (0.173, 4.40mm Width) pacakge is used for space saving.The characteristics of Capacitive Switch enable it to provide superior performance.Sensor and detector interface is mounted using the technique of Surface Mount.To avoid unnecessary cooling, the operating temperature should be kept at -40°C~85°C.As an input type, Logic is used.16 terminations are used to prevent signals from reflecting off the end of the transmission line.Using its base part number BU2105* you can locate related electronic parts.Sensor and detector interface is configured wSensor and detector interfaceh 1 functions in this case.Sensor and detector interface operates wSensor and detector interfaceh the supply voltage of 5V.This is a type of electronic device with 16-pins.Pins on a 16 component are designed to serve the specific functions of that component.Sensor and detector interface is mounted in the direction of Surface Mount.When the operating supply current is maintained at 500μA, improved efficiency can be achieved.Failures will occur when the supply voltage exceeds 5.5V.There will be failures if the supply voltage falls below 4.5V.The 2 channels are designed for the transmission of data.In applications where a supply voltage of 5V is required, it is used.
BU21051FS-E2 Features
With 5V channels
operate temperature at the range of 500μA
BU21051FS-E2 Applications
There are a lot of ROHM Semiconductor BU21051FS-E2 applications of sensor and detector interfaces.
- Strain Gauges
- System power consumption
- Electric Sunroofs
- Motor Speed Control
- Analog Signal Processing With Filter Characteristics
- Camshaft VRS Interfaces
- Frequency and voltage inverters
- Position sensor
- Vehicle Speed VRS Interfaces
- Automatic Lighting (Residential and Commercial)
