Name: BD9763FVM-TR
Brand: ROHM Semiconductor
SKU: BD9763FVM-TR
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	10 Weeks
Contact Plating	Copper, Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-VSSOP, 8-MSOP (0.110, 2.80mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2008
Pbfree Code	yes
Part Status	Not For New Designs
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Switching Regulator or Controllers
Terminal Position	DUAL
Terminal Form	GULL WING
Terminal Pitch	0.65mm
Base Part Number	BD9763
Function	Step-Up
Number of Outputs	1
Output Voltage	2.5V
Output Type	Transistor Driver
Max Output Current	125mA
Input Voltage-Nom	7V
Analog IC - Other Type	SWITCHING REGULATOR
Output Configuration	Positive
Output Current	850mA
Voltage - Supply (Vcc/Vdd)	4V~9V
Control Features	Enable, Soft Start
Input Voltage (Min)	4V
Topology	Boost
Control Mode	VOLTAGE-MODE
Frequency - Switching	100kHz~1.2MHz
Input Voltage (Max)	9V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	No
Switcher Configuration	SINGLE
Max Frequency	1.2MHz
Duty Cycle (Max)	90%
Height Seated (Max)	0.9mm
Length	2.9mm
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

BD9763FVM-TR Product Details

BD9763FVM-TR Overview

Capsuled in the 8-VSSOP, 8-MSOP (0.110, 2.80mm Width) package, the switching controller suits most application needs. It is sufficient to generate 1 outputs with this dc motor controller. A solid enclosure of Tape & Reel (TR) surrounds pmic. There are Transistor Driver dc switching's output (s) that it can handle. A 4V~9V voltage is supplied to the dc control and used for operating it. Suitable for work in a -40°C~85°C TA dc switcher. It can switch at 100kHz~1.2MHz. dc dc regulator is made easier with Surface Mount. Switching control is made easier with the dcdc regulator's Enable, Soft Start. An analog IC with the SWITCHING REGULATOR signal is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. A variety of dc switching's functions can be performed on 8 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's voltage input is 7V. Other relevant dc to dc converter ics can be found by searching "BD9763". There are only 8 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. It is recommended that the input voltage of the dc dc voltage regulator be 4V. DC regulator outputs 2.5V voltage based on test statistics. It should be noted that the dc to dc regulator only accepts 9V voltage as input voltage. If you start a project, note down the dc dc regulator's usual output current of 850mA. DC switcher's Surface Mount qualifies it for most applications and prototypes. The max frequency of the pmic can reach 1.2MHz. There will be 125mA output current greater than 125mA from the dc switcher.