BD88420GUL-E2 Overview
There is a device embedded in 14-UFBGA, WLCSP .Amp parts is recommended that the chip be packaged in a Cut Tape (CT) case.Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 14 termination.2-Channel (Stereo) is the output configured for it.The device is of type Class AB .Electronic parts are mounted in the way of Surface Mount .Amp parts is powered by a voltage of 2.4V~5.5V volts.2 channels are present on the device.Operation can be ensured by Short-Circuit and Thermal Protection .A temperature greater than -40°C~85°C TA should not be used.There are 14 pins present on this device.The electronic part is mounted in the way of Surface Mount .As a result of the limAmp partsations of this electronic part, Amp parts has a maximum output power of 80mW kWh per hour.To ensure normal operation, the supply voltage (Vsup) must be maintained above 2.4V .The maximum supply voltage (Vsup) is reached at 5.5V .The device is powered by a voltage of 3.3V volts.A maximum supply current of 7.4mA is achieved.
BD88420GUL-E2 Features
14-UFBGA, WLCSP package
14 pin count
80mW kWh per hour
BD88420GUL-E2 Applications
There are a lot of ROHM Semiconductor
BD88420GUL-E2 audio amplifiers applications.
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video and image computer boards
- Medical instruments
- Television broadcasting equipment
