BD7836EFV-E2 Overview
There is a device embedded in 20-VSSOP (0.173, 4.40mm Width) Exposed Pad .Amp parts is recommended that the chip be packaged in a Cut Tape (CT) case.Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 20 termination.2-Channel (Stereo) is the output configured for it.The device is of type Class AB .Electronic parts are mounted in the way of Surface Mount .Amp parts is powered by a voltage of 4.5V~5.5V volts.2 channels are present on the device.Operation can be ensured by Depop, Short-Circuit Protection .A temperature greater than -40°C~85°C TA should not be used.There are 20 pins present on this device.The electronic part is mounted in the way of Surface Mount .As a result of the limAmp partsations of this electronic part, Amp parts has a maximum output power of 1.9W kWh per hour.To ensure normal operation, the supply voltage (Vsup) must be maintained above 4.5V .The maximum supply voltage (Vsup) is reached at 5.5V .The device is powered by a voltage of 5V volts.A maximum supply current of 10mA is achieved.
BD7836EFV-E2 Features
20-VSSOP (0.173, 4.40mm Width) Exposed Pad package
20 pin count
1.9W kWh per hour
BD7836EFV-E2 Applications
There are a lot of ROHM Semiconductor
BD7836EFV-E2 audio amplifiers applications.
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video and image computer boards
- Medical instruments
- Television broadcasting equipment
