BD6886GUL-E2 Overview
In order to package H bridge, Tape & Reel (TR) is used.H bridge is included in the 15-UFBGA, CSPBGA package as a cost-saving measure.Based on the supply voltage of 2.5V~5.5V, improved reliabilbridge drivery can be ensured.H bridge circuit is put into place in the way of Surface Mount.Motor driver H bridge is possible for -25°C~150°C TJ to operate normally at motor driver H bridges operating temperature.There are lots of uses for H bridge motor driver, including DC Motors, General Purpose.On the PCB H gate is mounted using Surface Mount.To terminate a transmission line with the H bridge whose characteristic impedance matches the line, 15 terminations are employed.Signal interfaces include 6 pins that serve as pronged contacts.The base H bridge ic number of BD6886 allows you to find more related H bridge ics by using that number.To operate H bridge circuit, a voltage supply of 5V is required.H bridge circuit contains an analog IC type VOICE COIL MOTOR CONTROLLER.The power supply pins and the output pins are conducting a current of 200mA.It is through the 15 pins that the bridge driver can perform its specific functions.The output of this Hbridge is 1.The operating supply voltage is maintained at 3V in order to ensure high efficiency.There is a supply of electricity from 35V to the electrical load.
BD6886GUL-E2 Features
Available in 15-UFBGA, CSPBGA Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : BD6886
Number of Receivers: 3V
BD6886GUL-E2 Applications
There are a lot of ROHM Semiconductor
BD6886GUL-E2 Full Bridge Drivers, Half-Bridge Drivers applications.
- Desktop Computers
- V-Core
- Non-V-Core
- Workstations
- High-Current DC-DC Point-of-Load Converters
- Networking Microprocessor Voltage Regulators
- Telecom Microprocessor
- Voltage Regulators
- Small Form-Factor Voltage Regulator Modules
- Notebook Computers
