BD6512F-E2 Overview
The package is in the form of a Tape & Reel (TR).In the 8-SOIC (0.173, 4.40mm Width) package, it is included.It has been mounted as Surface Mount on the LED driver.It owns USB Switch switch type.Keeping the temperature at -25°C~85°C TA ensures reliable operation.The lighting driver is equipped with 2 outputs that can be used.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.This LED driving board is equipped with Status Flag features in order for it to be useful.There is a BD651* family of things that it belongs to.As a result, there are 8 terminations.In order to operate, the 8 pins are used.It is important to note that the LED driving board has 2 functions.To comply with the operation criteria, the maximum output current is reduced to 600mA.With a supply voltage of 5V, high efficiency is possible.It is mounted in the way of Surface Mount.There are 8 pins in total on this board.It has a resistance of 100mOhm.When this is the case, the output current is set to 500mA.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.In order to operate normally, the supply voltage (Vsup) must be maintained above 3V.There is a voltage supply of 5V volts on this part.This LED driver can handle voltages up to 5.5V volts.As a minimum input voltage, it requires 2.7V volts.By using this lighting driver, it is also possible to produce CONTROL LOGIC: ACTIVE HIGH.
BD6512F-E2 Features
Supplied from 5V
Resistance of 100mOhm
Additional features like CONTROL LOGIC: ACTIVE HIGH
BD6512F-E2 Applications
There are a lot of ROHM Semiconductor BD6512F-E2 Power Switches ICs applications.
- Wireless Modem Data Cards
- Portable GPS Device
- PC Card Hot Swap
- Hot-Swap Systems
- Notebook and Tablet Computers
- Wearable Devices
- Solid State Drivers
- Set-top-box
- Set-Top Boxes
- Low Voltage I/O System Power
