BD6083GUL-E2 Overview
To save space on the board, it has a 35-UFBGA, CSP package. Using this LED driver, there are 6 + 4LDOs outputs.For mounting, it uses the Surface Mount method.In this case, it emerges as a DC DC Regulator with a high efficiency.It is possible for the led driver ic to operate normally at -30°C~85°C TA.Taking advantage of Backlight has considerable benefits.It operates based on the frequency of 1MHz.The system operates with a termination of 0.The base is configured with 36 pins.If the voltage supply is below 2.7V, undetermined failures may occur.A total of 6 segments are estimated.It has been mounted on Surface Mount.It is under the base part number BD608* that you can find this LED driver.There are 36 pins on it.Depending on its characteristics, it is classified into Display Drivers.The load is capable of receiving 150mA current.The power of systems depends on having 5.5V voltages inside.There is 5.5V output voltage on this device.
BD6083GUL-E2 Features
Available in the 35-UFBGA, CSP package
Operating temperature of -30°C~85°C TA
Frequency of 1MHz
Supply voltage of 3.6V
Operating with the supply voltage of 5.5V
Output voltage of 5.5V
BD6083GUL-E2 Applications
There are a lot of ROHM Semiconductor BD6083GUL-E2 LED Driver ICs applications.
- Gallery lighting
- Flicker-free LED Lighting using R1580N
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Stage and Studio lighting
- LED Lighting PFCs, Linear Dimmable
- LED backlight driver for LCD displays for portable equipment
- Architectural lighting
- LED Lightings for Industrial Equipment
- General lighting
- Replacement lamps
