BD5360FVE-TR Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. There is a Tape & Reel (TR)-packaging method applied to IC management. For your reference, this IC power includes a list of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. There are SOT-665 functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. When a supply voltage of 1.2V is applied to the power ic, it conducts. IC management conducts in a 1-voltage supply. Surface Mount mounts power management on the wall. 5 pins are present in total in this power management. This power management has 5 pins. A voltage (Vsup) that doesn't fall below 950mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. During this IC power, the maximum supply voltage (Vsup) should not exceed 6.5V volts. Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~105°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. In addition, IC management are other features such as [0], to mention only a few. It is always advisable to use BD53, the base supervisor number, when searching for similar PMICs from the manufacturer.
BD5360FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 950mV
BD5360FVE-TR Applications
There are a lot of ROHM Semiconductor BD5360FVE-TR Voltage Supervisors applications.
- Automotive permanent magnet synchronous motors
- Magnetic resonance imaging
- Satellite navigation
- Consumer electronics
- Power distribution systems of operating room
- Set top box
- Fire equipment power monitoring system
- Efficient information transmission
- Low voltage/high power - AI, GPU
- Battery cars
