BD5358G-TR Overview
A total of 5 terminals are used to mount this power management. Packaging is in the form of a Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. A series of 1 channels can be found on this supervisor. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. When a supply voltage of 1.2V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. Surface Mount is the one that mounts power management. 5 pins are present in total in this power management. Power managment ic pin count is 5. It is recommended that Vsup should not be less than 950mV for this IC power. Voltage (Vsup) shouldn't exceed 6.5V volts in this PMIC. In this case, Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~105°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. It is always advisable to use BD53, the base supervisor number, when searching for similar PMICs from the manufacturer.
BD5358G-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 950mV
BD5358G-TR Applications
There are a lot of ROHM Semiconductor BD5358G-TR Voltage Supervisors applications.
- Unattended substation automation
- Kitchen appliances
- Solar power charger
- Detection of phase imbalance
- Radar
- Electric heating appliances
- FPGA design
- Leakage protection
- Household appliances
- Detection of phase loss
