BD5358FVE-TR Overview
There are 5 terminals on this power management that allow it to be mounted. Tape & Reel (TR)-packaging is used. In this IC power you will find 1 functions for you to refer to. This power management is made up of 1 channels which are available in a series format. As a reference, this IC power includes SOT-665 functions for your convenience. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. A supply voltage of 1.2V is used to conduct the PMIC chip. IC management is possible to find a succession of 1 voltages that have been checked. Using Surface Mount, IC management is mounted. There are a total of 5 pins on power management. 5 pins are on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 950mV, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) is not to exceed 6.5V volts in this IC management. Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~105°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. A similar IC managements number of the manufacturer can always be found by using BD53, the base power ics number.
BD5358FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 950mV
BD5358FVE-TR Applications
There are a lot of ROHM Semiconductor BD5358FVE-TR Voltage Supervisors applications.
- emergency room
- Linux and server computing
- Precision measurement
- Data storage applications
- Detection of phase sequence
- Solar power charger
- Detection of phase imbalance
- Power distribution systems of CCU
- Medical-specific insulation monitor
- Consumer electronics
