BD5357G-TR Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 1 channels. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. IC management conducts in a 1.2V-voltage supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount mounts power management on the wall. It has a total of 5 pins that are attached to IC management. There are 5 pins on the supervisor. It is recommended that Vsup should not be less than 950mV for this IC power. There should be no more than 6.5V volts of supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. It is recommended that the supervisor be set to this temperature: -40°C~105°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. It is always advisable to use BD53, the base supervisor number, when searching for similar PMICs from the manufacturer.
BD5357G-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 950mV
BD5357G-TR Applications
There are a lot of ROHM Semiconductor BD5357G-TR Voltage Supervisors applications.
- Microcontroller system
- Dash board
- Electric heating appliances
- Consumer electronics
- Urban rail transit weak current power monitoring
- Electronics installed in the vehicle
- Unattended substation automation
- emergency room
- Fire equipment power monitoring system
- Battery cars
