BD5357FVE-TR Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Power management is packaged in a Tape & Reel (TR) way. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels available on this supervisor, and each channel has a different function. For your reference, this PMIC includes a list of SOT-665 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. IC management conducts in a 1.2V-voltage supply. IC management is possible to find a succession of 1 voltages that have been checked. Using Surface Mount, IC management is mounted. Taking into account all of the pins, this power management has a total of 5. There are 5 pins on the supervisor. There should be a minimum voltage supply (Vsup) of 950mV for this PMIC. The supply voltage (Vsup) should not exceed 6.5V volts in this IC power. Mounting type Surface Mount is recommended. The temperature of the supervisors should be set to this range: -40°C~105°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. A similar IC managements number of the manufacturer can always be found by using BD53, the base power ics number.
BD5357FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 950mV
BD5357FVE-TR Applications
There are a lot of ROHM Semiconductor BD5357FVE-TR Voltage Supervisors applications.
- Rechargeable batteries
- Insulation fault location system
- Embedded computing
- Dash board
- Microcontroller system
- Battery cars
- Detection of phase loss
- Detection of phase imbalance
- emergency room
- Cloud computing
