BD5355G-TR Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. A Tape & Reel (TR) package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels available on this supervisor, and each channel has a different function. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. The supervisor is always powered by a 1.2V volt supply. Power management conducts at a voltage of 1. Using Surface Mount, IC management is mounted. It has a total of 5 pins that are attached to IC management. 5 pins are present on the power management system. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 950mV. In this PMIC, the maximum supply voltage (Vsup) should not exceed 6.5V volts. The recommended mounting type for IC management is Surface Mount. The supervisors should be set to the following temperature: -40°C~105°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. If you want to search for similar IC managements of this manufacturer, you can always refer to BD53, which is the base power ics number.
BD5355G-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 950mV
BD5355G-TR Applications
There are a lot of ROHM Semiconductor BD5355G-TR Voltage Supervisors applications.
- Network equipment
- Power distribution systems of ICU
- DSP
- Household appliances
- Rechargeable batteries
- DVR
- Smartphones
- Battery cars
- Detection of phase sequence
- Leakage current detection
