BD5355FVE-TR Overview
There are 5 terminals on this power management that allow it to be mounted. It is packaged with Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. Power management consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of SOT-665 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. There is a voltage supply of 1.2V for the PMIC chip, and the chip conducts at that voltage. Power management conducts at a voltage of 1. The power management is mounted by a Surface Mount-axis. In total, it has 5 pins on IC management. 5 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 950mV. There should be no more than 6.5V volts of maximum supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. This range of temperature should be set for the supervisors: -40°C~105°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. It is always advisable to use BD53, the base supervisor number, when searching for similar PMICs from the manufacturer.
BD5355FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 950mV
BD5355FVE-TR Applications
There are a lot of ROHM Semiconductor BD5355FVE-TR Voltage Supervisors applications.
- Refrigeration
- Power distribution systems of infant care room
- Sensitive sensors
- Multi-voltage system
- DSP
- Power distribution systems of operating room
- Leakage protection
- WiFi router
- Insulation fault location system
- Automotive power systems
