BD5354FVE-TR Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please refer to this PMIC for 1 functions. There are 1 channels on this power managment ic that can be found in a series. As a reference, this IC power includes SOT-665 functions for your convenience. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. A supply voltage of 1.2V is used to conduct the PMIC chip. During operation, the power ic is supplied with a voltage of 1. The power management is mounted by Surface Mount. In total, the power management has 5 pins in it. The pins of the power management system count 5. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 950mV. The maximum supply voltage (Vsup) is not to exceed 6.5V volts in this IC management. A Surface Mount mounting type is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~105°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. It is always advisable to use BD53, the base supervisor number, when searching for similar PMICs from the manufacturer.
BD5354FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 950mV
BD5354FVE-TR Applications
There are a lot of ROHM Semiconductor BD5354FVE-TR Voltage Supervisors applications.
- Utility meter
- Set top box
- Power distribution systems of infant care room
- Detection of phase imbalance
- Insulation fault location system
- Embedded computing
- Data storage applications
- Power distribution systems of CCU
- Smartphones
- Important electronics for automotive safety
