BD5350G-TR Overview
It is mounted through 5 terminals on the power management. Packaged in the form of a Tape & Reel (TR), power management is easy to use. There are 1 functions included in this PMIC so that you can refer to them. A series of 1 channels can be found on this supervisor. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. The supervisor is always powered by a 1.2V volt supply. Power ics operate at 1 supply voltages. Surface Mount mounts power management on the wall. There are a total of 5 pins on power management. There are 5 pins on the power managment ic. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 950mV. The maximum supply voltage (Vsup) in this PMIC should not exceed 6.5V volts. The recommended mounting type is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~105°C TA. Power management has an output of Push-Pull, Totem Pole during operation. For similar manage ics search of the manufacturer, you can always refer to BD53, the base PMIC number.
BD5350G-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 950mV
BD5350G-TR Applications
There are a lot of ROHM Semiconductor BD5350G-TR Voltage Supervisors applications.
- Insulation fault location system
- Important electronics for automotive protection
- Urban rail transit weak current power monitoring
- DSP
- Consumer electronics
- Digitally controlled LDO regulators circuit
- DVR
- Microprocessor system
- Fire equipment power monitoring system
- Leakage protection
