BD5348G-TR Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. This power ic is packaged in a way that looks like a Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. There is a voltage supply of 1.2V for the PMIC chip, and the chip conducts at that voltage. When a supply voltage of 1 is applied to the power ic, it conducts. The power management is mounted by Surface Mount. A total of 5 pins are located on this power management. 5 pins are present on the power management system. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 950mV, which is the minimum supply voltage that should be applied. In this PMIC, the maximum supply voltage (Vsup) should not exceed 6.5V volts. The mounting type of the supervisors is Surface MountThis range of temperature should be set for the supervisors: -40°C~105°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. A similar IC managements number of the manufacturer can always be found by using BD53, the base power ics number.
BD5348G-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 950mV
BD5348G-TR Applications
There are a lot of ROHM Semiconductor BD5348G-TR Voltage Supervisors applications.
- Efficient information transmission
- DC stabilized power supply module
- Embedded computing
- Dash board
- Military communications
- WiFi router
- Personal computers
- DSP
- Insulation fault location system
- Leakage current detection
