BD5341FVE-TR Overview
There are 5 terminals on this power management that allow it to be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. Please find attached 1 functions for your reference in this IC power. On this supervisor, there is a series of 1 channels that can be found. As a reference, this IC power includes SOT-665 functions for your convenience. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. In a 1.2V supply voltage, the power management conducts. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount mounts IC management. In total, the power management has 5 pins in it. There are 5 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 950mV. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 6.5V volts. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~105°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. It is always advisable to use BD53, the base supervisor number, when searching for similar PMICs from the manufacturer.
BD5341FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 950mV
BD5341FVE-TR Applications
There are a lot of ROHM Semiconductor BD5341FVE-TR Voltage Supervisors applications.
- Electric heating appliances
- WiFi router
- Smart meter
- Insulation fault location system
- Dash board
- Telecommunications equipment
- Satellite navigation
- Power communication system
- DC stabilized power supply module
- Military communications
