BD5331FVE-TR Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. There is a Tape & Reel (TR)-packaging method applied to IC management. In this IC power you will find 1 functions for you to refer to. A series of 1 channels can be found on this supervisor. In this IC management you will find SOT-665 functions for you to refer to. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. A supply voltage of 1.2V is used to conduct the PMIC chip. A supply voltage of 1 is used to conduct the PMIC chip. Using Surface Mount, IC management is mounted. In total, it has 5 pins on IC management. There are 5 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 950mV. The maximum supply voltage (Vsup) is not to exceed 6.5V volts in this IC management. The mounting type of the supervisors is Surface MountIt is recommended to set the supervisor's temperature to this range: -40°C~105°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. You can always use BD53, the base supervisor number, to search for similar PMICs of the manufacturer.
BD5331FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 950mV
BD5331FVE-TR Applications
There are a lot of ROHM Semiconductor BD5331FVE-TR Voltage Supervisors applications.
- Battery cars
- Power distribution systems of operating room
- Rechargeable batteries
- DSP
- Radio
- FPGA design
- Network equipment
- Personal computers
- Smart meter
- DC stabilized power supply module
