BD5328G-TR Overview
A total of 5 terminals are used to mount this power management. In terms of packaging, power management follows the Tape & Reel (TR) model. The purpose of this IC management is to provide you with a reference of 1 functions. It is possible to find on this power management a series of 1 channels. IC management is packaged as a SC-74A, SOT-753 package. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. IC management conducts at a voltage of 1.2V. During operation, the power ic is supplied with a voltage of 1. The mount is provided by Surface Mount. It has a total of 5 pins that are attached to IC management. This power management system has 5 pins. There should be a minimum voltage supply (Vsup) of 950mV for this PMIC. During this IC power, the maximum supply voltage (Vsup) should not exceed 10V volts. In this case, Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~105°C TA. Power management has an output of Push-Pull, Totem Pole during operation. There is a supply current of 950nA for the power management. It is always advisable to use BD53, the base supervisor number, when searching for similar PMICs from the manufacturer.
BD5328G-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 950mV
950nA operating supply current
BD5328G-TR Applications
There are a lot of ROHM Semiconductor BD5328G-TR Voltage Supervisors applications.
- Leakage current detection
- Smartphones
- Precision measurement
- Multi-voltage system
- DVR
- Power distribution systems of ICU
- Battery cars
- Satellite navigation
- Battery cars
- Analog circuit
