BD5324FVE-TR Overview
It is mounted through 5 terminals on the power management. A Tape & Reel (TR) package is used to package the power management. Please refer to this PMIC for 1 functions. This power management is made up of 1 channels which are available in a series format. In this PMIC, you can find SOT-665 functions for your reference. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. During operation, the power ic is supplied with a voltage of 1.2V. When 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. There are a total of 5 pins on power management. 5 pins are present on the power management system. It is recommended that Vsup should not be less than 950mV for this IC power. Voltage (Vsup) shouldn't exceed 6.5V volts in this PMIC. In this case, Surface Mount is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~105°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. A similar IC managements number of the manufacturer can always be found by using BD53, the base power ics number.
BD5324FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 950mV
BD5324FVE-TR Applications
There are a lot of ROHM Semiconductor BD5324FVE-TR Voltage Supervisors applications.
- Smartphones
- FPGA design
- Battery cars
- Detection of phase sequence
- Magnetic resonance imaging
- Urban rail transit weak current power monitoring
- DSP
- Automotive permanent magnet synchronous motors
- Power distribution systems of infant care room
- Power distribution systems of operating room
