BD5323FVE-TR Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. It is packaged with Tape & Reel (TR). Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 1 channels. In this IC management you will find SOT-665 functions for you to refer to. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. During operation, the power ic is supplied with a voltage of 1.2V. Power ics operate at 1 supply voltages. Surface Mount mounts IC management. There are a total of 5 pins on power management. Power managment ic pin count is 5. There should be a minimum voltage supply (Vsup) of 950mV for this PMIC. This IC power should be powered by no more than 6.5V volts of supply voltage (Vsup). The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: -40°C~105°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. To find similar IC managements from the manufacturer, you can always search by BD53.
BD5323FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 950mV
BD5323FVE-TR Applications
There are a lot of ROHM Semiconductor BD5323FVE-TR Voltage Supervisors applications.
- Microcontroller system
- Battery-powered equipment
- Radar
- Sensitive sensors
- Rechargeable batteries
- Leakage protection
- DVR
- Low voltage/high power - AI, GPU
- Smart meter
- DSP
