BD5250FVE-TR Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Packaging is in the form of a Tape & Reel (TR). For your reference, this IC power includes a list of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of SOT-665 functions. There are a lot of similarities between this IC power and other Voltage Detector products. IC management conducts in a 1.2V-voltage supply. In a 1 supply voltage, the PMIC chip conducts. By Surface Mount, IC management has been mounted. 5 pins are present in total in this power management. There are 5 pins on the power managment ic. Supply voltage (Vsup) should be at least 950mV for this power management. There should be no more than 6.5V volts of supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. The supervisors should be set to the following temperature: -40°C~105°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. For similar manage ics search of the manufacturer, you can always refer to BD52, the base PMIC number. The IC power comes from the well-known BD52xx series.
BD5250FVE-TR Features
Voltage Detector type
Minimum supply voltage of 950mV
BD5250FVE-TR Applications
There are a lot of ROHM Semiconductor BD5250FVE-TR Voltage Supervisors applications.
- Data storage applications
- Detection of phase sequence
- Insulation fault location system
- Set top box
- Satellite navigation
- Electronics installed in the vehicle
- Important electronics for automotive safety
- Embedded computing
- Medical-specific isolation transformer
- Military communications
