BD5248FVE-TR Overview
This power management consists of 5 mounting terminals on which it can be mounted. Tape & Reel (TR)-packaging is used. Please find attached 1 functions for your reference in this IC power. This power management is made up of 1 channels which are available in a series format. Please find attached SOT-665 functions for your reference in this IC power. It is a IC power that shares many benefits with other products from the Voltage Detector line. During operation, the power ic is supplied with a voltage of 1.2V. Power ics operate at 1 supply voltages. The power management is mounted by Surface Mount. In total, it has 5 pins on IC management. This power management has 5 pins. A voltage (Vsup) that doesn't fall below 950mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) in this PMIC should not exceed 6.5V volts. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~105°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. A similar IC managements number of the manufacturer can always be found by using BD52, the base power ics number. Supervisors from the well-known BD52xx series product line are featured in this PMIC.
BD5248FVE-TR Features
Voltage Detector type
Minimum supply voltage of 950mV
BD5248FVE-TR Applications
There are a lot of ROHM Semiconductor BD5248FVE-TR Voltage Supervisors applications.
- Military communications
- Medical-specific insulation monitor
- DSP
- Rechargeable batteries
- Fire equipment power monitoring system
- Detection of phase imbalance
- Computer applications
- Solar power charger
- Radio
- Low voltage/high power - AI, GPU
