BD5243FVE-TR Overview
Power management is mounted through 5 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. In this IC power you will find 1 functions for you to refer to. Power management consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of SOT-665 functions. There are many benefits that this IC power shares with other Voltage Detector products as well. When 1.2V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. The power management is mounted by a Surface Mount-axis. In total, IC powers are 5 pins on the board. Power managment ic pin count is 5. There should be a minimum voltage supply (Vsup) of 950mV for this PMIC. In this PMIC, the maximum supply voltage (Vsup) should not exceed 6.5V volts. Mounting type Surface Mount is recommended. You should set the supervisor's temperature during -40°C~105°C TA . During operation, this power management system outputs Open Drain or Open Collector. You can always use BD52, the base supervisor number, to search for similar PMICs of the manufacturer. Supervisors from the well-known BD52xx series product line are featured in this PMIC.
BD5243FVE-TR Features
Voltage Detector type
Minimum supply voltage of 950mV
BD5243FVE-TR Applications
There are a lot of ROHM Semiconductor BD5243FVE-TR Voltage Supervisors applications.
- Smartphones
- Data storage applications
- Network equipment
- Satellite navigation
- Precision measurement
- Solar power charger
- Telecommunications equipment
- Kitchen appliances
- Automotive permanent magnet synchronous motors
- Consumer electronics
