BD5227FVE-TR Overview
It is mounted through 5 terminals on the power management. In terms of packaging, power management follows the Tape & Reel (TR) model. For your reference, this IC power includes a list of 1 functions. There are 1 channels on this power managment ic that can be found in a series. There are SOT-665 functions included in this PMIC so that you can refer to them. It is a IC power that shares many benefits with other products from the Voltage Detector line. When 1.2V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount mounts power management on the wall. It has a total of 5 pins that are attached to IC management. 5 pins are on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 950mV volts. There should be no more than 10V volts of maximum supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountYou should set the supervisor's temperature during -40°C~105°C TA . During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. For this power management, there is an 950nA volt supply current. A similar IC managements number of the manufacturer can always be found by using BD52, the base power ics number. A PMIC from the well-known BD52xx series of products is being offered here.
BD5227FVE-TR Features
Voltage Detector type
Minimum supply voltage of 950mV
950nA operating supply current
BD5227FVE-TR Applications
There are a lot of ROHM Semiconductor BD5227FVE-TR Voltage Supervisors applications.
- Medical-specific insulation monitor
- Analog circuit
- Automotive power systems
- Linux and server computing
- Radio
- Power communication system
- Detection of phase loss
- Fire equipment power monitoring system
- Battery-powered equipment
- Important electronics for automotive protection
