BD49K42G-TL Overview
Power management is mounted through 3 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. There are 1 functions included in this PMIC so that you can refer to them. There are a total of 1 channels on this supervisor, and they are arranged in a series. The purpose of this IC power is to provide you with a reference of TO-236-3, SC-59, SOT-23-3 functions. There are many benefits that this IC power shares with other Voltage Detector products as well. The package peak reflow temperature is specified to be NOT SPECIFIED. IC management is possible to find a succession of 1 voltages that have been checked. The power management is mounted by Surface Mount. 3 pins are present on the power management system. It is recommended that Vsup should not be less than 2.3V for this IC power. The maximum supply voltage (Vsup) in this PMIC should not exceed 6V volts. The mounting type of the supervisors is Surface MountTemperature setting for the supervisors should be -40°C~105°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 900nA. A similar IC managements number of the manufacturer can always be found by using BD49, the base power ics number. Supervisors from the well-known BD49Kxx series product line are featured in this PMIC.
BD49K42G-TL Features
Voltage Detector type
Minimum supply voltage of 2.3V
900nA operating supply current
BD49K42G-TL Applications
There are a lot of ROHM Semiconductor BD49K42G-TL Voltage Supervisors applications.
- Smart meter
- Medical-specific isolation transformer
- Digitally controlled LDO regulators circuit
- Dash board
- Detection of phase loss
- Network equipment
- Display equipment
- Consumer electronics
- Rechargeable batteries
- Multi-voltage system
