BD4959FVE-TR Overview
A total of 5 terminals are used to mount this power management. In terms of packaging, power management follows the Tape & Reel (TR) model. To assist you, this IC power includes 1 functions. There are 1 channels on this power managment ic that can be found in a series. To assist you, this PMIC includes SOT-665 functions. With power management, you get a lot of benefits that you won't find in other Voltage Detector products. When a supply voltage of 5.7V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. The power management is mounted by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. It has a total of 5 pins that are attached to IC management. 5 pins make up the power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than -300mV volts. There should be no more than 10V volts of supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. This power management is the recommended temperature range for the supervisors: -40°C~105°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. A similar IC managements number of the manufacturer can always be found by using BD49, the base power ics number. A power supply of 4.9V watts is required for the operation of this power management. The maximum supply temperature voltage supervisor can handle is 1.98μA. As you can see, this IC power comes from the well-known BD49xxx series of products.
BD4959FVE-TR Features
Voltage Detector type
Minimum supply voltage of -300mV
BD4959FVE-TR Applications
There are a lot of ROHM Semiconductor BD4959FVE-TR Voltage Supervisors applications.
- Rechargeable batteries
- Electronics installed in the vehicle
- DC stabilized power supply module
- Dash board
- Efficient information transmission
- Leakage protection
- Radio
- Medical-specific insulation monitor
- Household appliances
- Utility meter
