BD4952G-TR Overview
There are 5 terminals on this power management that allow it to be mounted. This power ic is packaged in a way that looks like a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 1 channels. As a reference, this IC power includes SC-74A, SOT-753 functions for your convenience. There are a number of benefits that this PMIC has in common with other Voltage Detector manage ics. IC management conducts in a 5V-voltage supply. During operation, the power ic is supplied with a voltage of 1. Power management is included in the Surface Mount mount. Power Management Circuits is a subcategory of this PMIC chip. A total of 5 pins are located on this power management. Power managment ic pin count is 5. Supply voltage (Vsup) should be at least -300mV for this power management. There should be no more than 10V volts of supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~105°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. For similar manage ics search of the manufacturer, you can always refer to BD49, the base PMIC number. This power management requires 4.9V power to work. The power management can work with a maximum supply temperature of 1.8μA. It is one of the well-known BD49xxx series power ic line.
BD4952G-TR Features
Voltage Detector type
Minimum supply voltage of -300mV
BD4952G-TR Applications
There are a lot of ROHM Semiconductor BD4952G-TR Voltage Supervisors applications.
- Power distribution systems of ICU
- Important electronics for automotive protection
- Electronics installed in the vehicle
- Refrigeration
- Power distribution systems of CCU
- Radio
- Dash board
- Radar
- Detection of phase sequence
- Detection of phase loss
