BD4952FVE-TR Overview
There are 5 terminals on this power management that allow it to be mounted. Packaging is in the form of a Tape & Reel (TR). Please refer to this PMIC for 1 functions. There are 1 channels on this power managment ic that can be found in a series. To assist you, this PMIC includes SOT-665 functions. There are a lot of similarities between this IC management and other Voltage Detector products. When a supply voltage of 5V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount is the one that mounts power management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Power management has a total of 5 pins. There are 5 pins on the power managment ic. Supply voltage (Vsup) should be at least -300mV for this power management. During this IC power, the maximum supply voltage (Vsup) should not exceed 10V volts. The mounting type of the supervisors is Surface MountThis range of temperature should be set for the supervisors: -40°C~105°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. You can always use BD49, the base supervisor number, to search for similar PMICs of the manufacturer. A power supply of 4.9V watts is required for the operation of this power management. The power management can work with a maximum supply temperature of 1.8μA. The IC power comes from the well-known BD49xxx series.
BD4952FVE-TR Features
Voltage Detector type
Minimum supply voltage of -300mV
BD4952FVE-TR Applications
There are a lot of ROHM Semiconductor BD4952FVE-TR Voltage Supervisors applications.
- Electronics installed in the vehicle
- DVR
- Military communications
- Automotive power systems
- Consumer electronics
- Detection of phase imbalance
- Power distribution systems of infant care room
- Microcontroller system
- Fire equipment power monitoring system
- Low voltage/high power - AI, GPU
