BD4950FVE-TR Overview
This power management consists of 5 mounting terminals on which it can be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. Please find attached 1 functions for your reference in this IC power. On this supervisor, there is a series of 1 channels that can be found. In this PMIC, you can find SOT-665 functions for your reference. There are many benefits that this IC power shares with other Voltage Detector products as well. When 4.8V is applied to the power ic, it conducts. Power ics operate at 1 supply voltages. The power management is mounted by a Surface Mount-axis. There is a subcategory of this power ic known as Power Management Circuits. Power management has a total of 5 pins. This power management system has 5 pins. IC management can only work with a supply voltage of -300mV volts. Voltage (Vsup) shouldn't exceed 10V volts in this PMIC. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~105°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. If you want to search for similar IC managements of this manufacturer, you can always refer to BD49, which is the base power ics number. The power management must be powered by 4.9V volts to function properly. The maximum supply temperature is 1.8μA. It is one of the well-known BD49xxx series power ic line.
BD4950FVE-TR Features
Voltage Detector type
Minimum supply voltage of -300mV
BD4950FVE-TR Applications
There are a lot of ROHM Semiconductor BD4950FVE-TR Voltage Supervisors applications.
- Electronics installed in the vehicle
- Set top box
- Leakage current detection
- External alarm
- Consumer electronics
- Power communication system
- Power distribution systems of CCU
- emergency room
- Insulation fault location system
- Magnetic resonance imaging
